NATURAL PATINA
Your bronze door will develop a rich, living patina over time through natural oxidation.
The surface will transition through warm brown and red tones to deeper, more complex hues.
This natural aging process is a hallmark of authentic bronze craftsmanship.
Each door's patina tells the story of its environment and the passage of time.
To slow the patina process, apply Renaissance Wax or a museum-grade protective coating.
ROUTINE CLEANING
Wipe the door surface with a soft, dry microfiber cloth to remove dust and fingerprints.
For deeper cleaning, use a damp cloth with mild soap and water â avoid harsh chemicals.
Never use abrasive cleaners, steel wool, or scouring pads on the metal surface.
Dry thoroughly after any wet cleaning to prevent water spots or mineral deposits.
Clean the door handle and hardware separately using appropriate metal-safe products.
PROTECTIVE WAXING
Apply a thin coat of Renaissance Wax or carnauba-based wax every 6-12 months.
Use a soft cloth to apply wax in circular motions, covering all metal surfaces evenly.
Allow wax to haze for 10-15 minutes, then buff to a soft sheen with a clean cloth.
Waxing protects against moisture, fingerprints, and environmental exposure.
Reapply more frequently in coastal or high-humidity environments.
COASTAL & HUMID ENVIRONMENTS
Doors installed in coastal regions require more frequent maintenance due to salt air exposure.
Rinse the door with fresh water monthly to remove salt deposits.
Apply protective wax every 3-4 months rather than the standard 6-12 month interval.
Consider a marine-grade clear coat for maximum protection in extreme coastal conditions.
Inspect weather seals and hardware quarterly for signs of corrosion.
HARDWARE MAINTENANCE
Lubricate hinges and pivot mechanisms every 6 months with a silicone-based lubricant.
Check multi-point locking mechanism alignment annually and adjust if needed.
Inspect weather seals for wear and replace if they show signs of compression or cracking.
Tighten any loose screws on handles, hinges, and lock hardware as needed.
For FritsJurgens pivot systems, follow manufacturer guidelines for annual servicing.
HANDLE & ACCENT CARE
Clean handles regularly as they receive the most contact and show fingerprints first.
For accent materials (Mother of Pearl, semi-precious stones), use only a soft damp cloth.
Never apply chemical cleaners or metal polish to decorative stone or crystal accents.
Swarovski crystal elements can be cleaned with a lint-free cloth and glass cleaner.
Report any loosening of accent elements to your installer for prompt reattachment.
