TIME INVESTED: 90 - 92 hours

MECHANISM: Hinged, Pivot

MATERIALS USED: Brass

TECHNIQUES USED: Metal Sculpting and Manual Oxidation

DESIGN REFERENCES: The sleek and clean look of the design
cues from Scandinavian design principles,
which often emphasise functionality
and simplicity. The techniques applied in
crafting the door help create a sensation
unique to itself. The Smooth Brass Door is a
minimalistic portrayal of designs inspired by
practicality

Referenced door is 4.0 ft (W) × 8.5 ft (H) × 0.23 ft (D) All doors can be customized and made to precise dimensions, and allow for customizations. Shop drawings are included with all door purchases.

NATURAL PATINA

Your brass door will develop a distinctive patina over time as the surface oxidizes naturally.

This living finish transitions through warm golden tones to deeper honey and amber hues.

Each door's patina is unique to its environment, creating a one-of-a-kind character.

To preserve the original bright brass finish, apply a protective lacquer or wax coating.

To encourage patina development, allow the surface to age naturally without polishing.

ROUTINE CLEANING

Wipe the door surface with a soft, dry microfiber cloth to remove dust and fingerprints.

For deeper cleaning, use a damp cloth with mild soap and water — avoid harsh chemicals.

Never use abrasive cleaners, steel wool, or scouring pads on the metal surface.

Dry thoroughly after any wet cleaning to prevent water spots or mineral deposits.

Clean the door handle and hardware separately using appropriate metal-safe products.

PROTECTIVE WAXING

Apply a thin coat of Renaissance Wax or carnauba-based wax every 6-12 months.

Use a soft cloth to apply wax in circular motions, covering all metal surfaces evenly.

Allow wax to haze for 10-15 minutes, then buff to a soft sheen with a clean cloth.

Waxing protects against moisture, fingerprints, and environmental exposure.

Reapply more frequently in coastal or high-humidity environments.

COASTAL & HUMID ENVIRONMENTS

Doors installed in coastal regions require more frequent maintenance due to salt air exposure.

Rinse the door with fresh water monthly to remove salt deposits.

Apply protective wax every 3-4 months rather than the standard 6-12 month interval.

Consider a marine-grade clear coat for maximum protection in extreme coastal conditions.

Inspect weather seals and hardware quarterly for signs of corrosion.

HARDWARE MAINTENANCE

Lubricate hinges and pivot mechanisms every 6 months with a silicone-based lubricant.

Check multi-point locking mechanism alignment annually and adjust if needed.

Inspect weather seals for wear and replace if they show signs of compression or cracking.

Tighten any loose screws on handles, hinges, and lock hardware as needed.

For FritsJurgens pivot systems, follow manufacturer guidelines for annual servicing.

HANDLE & ACCENT CARE

Clean handles regularly as they receive the most contact and show fingerprints first.

For accent materials (Mother of Pearl, semi-precious stones), use only a soft damp cloth.

Never apply chemical cleaners or metal polish to decorative stone or crystal accents.

Swarovski crystal elements can be cleaned with a lint-free cloth and glass cleaner.

Report any loosening of accent elements to your installer for prompt reattachment.

WHAT'S INCLUDED

Bespoke metal door slab with your selected finish and handle design.

Door frame with thermal break profile system and weather seals.

Multi-point locking hardware with keys.

Hinge set or FritsJurgens concealed pivot system (per your specification).

Installation guide and care documentation.

Custom shop drawings specific to your opening dimensions.

INSTALLATION OVERVIEW

Professional installation by an experienced door specialist is required.

Installation typically requires 2-3 skilled technicians due to the door's weight.

Average installation time: 4-8 hours depending on configuration and site conditions.

Structural opening must be prepared to match the custom shop drawings provided.

Electrical preparation may be required for biometric access or smart lock options.

PRE-INSTALLATION

Verify all opening dimensions match the custom shop drawings before delivery.

Ensure the structural opening can support the door weight (6.8-7 kg per sq. ft.).

Level and plumb the opening to within 2mm tolerance for proper door operation.

Prepare electrical rough-in if biometric access or smart lock features were specified.

Protect surrounding finishes — the installation area should be clear and accessible.

LEAD TIME & PROCESS

Lead time: 16-20 weeks from order confirmation to delivery.

Week 1-2: Custom shop drawings created and sent for your approval.

Week 3-14: Artisan handcrafting, metal skin application, and finishing.

Week 15-16: Quality inspection, hardware fitting, and finishing touches.

Week 17-20: Crating, shipping, and delivery coordination.

Your concierge will provide regular progress updates throughout production.

COMMERCIAL APPLICATIONS

Commercial-grade specifications available for hospitality, retail, and office projects.

Fire-rated configurations (60, 90, or 120 minutes) available upon request.

ADA-compliant hardware and threshold options can be specified.

Bulk pricing and project-specific lead times available for multi-door orders.

Contact our trade concierge for commercial specification sheets and pricing.